D-Link Forums

The Graveyard - Products No Longer Supported => D-Link NetDefend Firewalls => Topic started by: Brasse on January 12, 2010, 05:41:45 AM

Title: Error saving configuration
Post by: Brasse on January 12, 2010, 05:41:45 AM

We have 2 offices, and in each office we have on DFL-800, one office in Sweden and on in Estonia. Now i want to open one of the DFL-800 to external administration.
Ive tried to configure our DFL-800, and it works perfectly. However, when my colleague in Estonia do the exact same configuration in their DFL-800 it wont work, the log file shows no dropped packages in port 443 and i get no response when i try to connect.
The same thing happens when we try to configure SSH, it just times out.

When he saves the configuration however, (save and activate) this message pops up:

Code: [Select]

Warning W4440/IFACES in "wan1.Ethernet":
  - Broadcast IP cannot be equal to the interface IP
  wan1 PBR main MTU 1500 BUILTIN { DRIVER "r8139" TYPE "PCI" BUS 0 SLOT 2 PORT 0 MEDIA "Auto" DUPLEX "Auto" RECVMCAST Aut
License file successfully loaded.
I dont really know what that means, but "Broadcast" brings my mind to DHCP-server. Their DFL-800 is configured not to use DHCP-server(they have a win2k3 server for that), and has no DHCP-ip range.

Where should i(we) start troubleshooting?

Title: Re: Error saving configuration
Post by: Fatman on January 12, 2010, 09:38:48 AM

There WAN interface was defined wrong and is not being brought up.  Ensure that their settings (particularly network definition) for their WAN interface is correct.

Title: Re: Error saving configuration
Post by: Brasse on January 13, 2010, 01:54:44 AM

Your right, he had not configured it correctly.
Now everything works, even got LAN - LAN IPSec connection to work, using the guide found on dlink support page :)

Thanks!