D-Link Forums

The Graveyard - Products No Longer Supported => D-Link NetDefend Firewalls => Topic started by: barasnon on February 09, 2010, 06:07:02 AM

Title: rdp portforwarding on dfl260
Post by: barasnon on February 09, 2010, 06:07:02 AM

hi I'm a newbie to firewall setup

I have a dfl260, behind this my windows server 2003 .
 I want access the server through remote desktop connection (RDP), using internet outside,

the IP setting is this:
192.168.1.2 / 255.255.255.0  -server ip
192.168.1.1 / 255.255.255.0 - firewall IP

from WAN port I connect my cable from the other server
where my internet is connected:
if I connect this IP directly to the computer to test the internet, the connection is okay.
192.168.55.30
255.255.255.224/27
192.168.55.50 -Gateway
192.168. 55.2-dns 1
192.168.55.5- dns 2

Please help me to setup this firewall I am not very familiar to portwarding..

thank you for all your help


regards..

Title: Re: rdp portforwarding on dfl260
Post by: Fatman on February 09, 2010, 07:58:44 AM

The FAQ for a simple port forward is here.

http://www.dlink.com/support/faq/?prod_id=2393

That said I would avoid this layout as you are double NAT'ing the servers behind the DFL.  It would be preferable if you could put all your servers behind the DFL (say on the DMZ interface) and had your internet connection come directly to the WAN port of the DFL.

Title: Re: rdp portforwarding on dfl260
Post by: barasnon on February 09, 2010, 10:27:12 PM

Thanks Fatman, I cannot put the other server behind the firewall because this is maintain by the other people.


thank you..

Title: Re: rdp portforwarding on dfl260
Post by: barasnon on February 10, 2010, 12:19:39 AM

Thanks Fatman it working now, however my I am trying to internet to register my firewall but I cannot connect. I just want to temporary connection to internet just for the update and registration of the unit.

thanks again..

Cheers!!