D-Link Forums

The Graveyard - Products No Longer Supported => D-Link NetDefend Firewalls => Topic started by: tanvignr on February 28, 2010, 07:44:12 PM

Title: DFL-260 ping problem
Post by: tanvignr on February 28, 2010, 07:44:12 PM

i have a 2821 router connected to my isp. in the back of 2821 i have DFL-260.my local users r connected through DFL-260.the problem is that i cant ping the 2821 from the local user through DFL-260. if there is any tutorial then pls provide me. i have some user manual which is not enough. thanks in advanceeeeeeee
i also cant ping from 2821 to DFL-260.

Title: Re: DFL-260 ping problem
Post by: Fatman on March 01, 2010, 08:36:44 AM

What are the IPs of EVERY device in question?

Title: Re: DFL-260 ping problem
Post by: tanvignr on March 01, 2010, 08:03:36 PM

My local lan-172.16.7.0/24
DFL lan ip: 172.16.7.5
DFL wan ip: 200.200.200.2
Router ip : 200.200.200.1
ISP ip: 10.0.22.25
GW: 10.0.22.26
FTP server: 10.10.50.1 (i have to access the ftp server through my local lan. i have to access the server through the ISP)

Title: Re: DFL-260 ping problem
Post by: Fatman on March 02, 2010, 08:43:27 AM

If you hook directly to the router with a static IP can you ping the router?

Can your DFL itself ping the router?

Triple NAT'ing?

Title: Re: DFL-260 ping problem
Post by: danilovav on March 05, 2010, 05:07:02 AM

To make LAN > DFL > 2821, you should have NAT rule for ping (with ICMP service)

To make 2821 > DFL ping, you should make rule allow wan/wan_gw core/wan_ip ping-inbound