D-Link Forums
The Graveyard - Products No Longer Supported => D-Link Storage => DNS ShareCenter Series => Topic started by: duss on March 15, 2010, 04:52:11 AM
-
hello (first - sorry for my english;)
i have big problem with my dns 313 A1 f/W:1.0
few days ago my wife turn off 313 on ON device - the device was connect on Rj45,
and she "damage" dns 313 ;)
hdd i was must format and my pc see dns only on cabel usb, whe i try connect to LAN i can't see it.
today i download firmware with click connet and then I try repair & reset device - but don't work it... ;( (coudln't copy file)
please help me -;)
-
Sounds like time to call for support, it appears broken.
-
heh
on my country (poland) - support say - we dont repair it after warranty. ;(
-
Well, the only suggestion I have is to reset it to factory defaults and see if it wakes up. If not, you probably have a dead device on your hands.
-
dead device on LAn - because on USB he alive....
-
That's why we do the factory reset, to see if the LAN interface can be restored. :)
-
when I reset device clic connect don't see Dns - when I wont ping default adres 192.168.0.32 i have nothing
and my router too don't see it.
the led : green - stay on, button D-link stay on blue, picture lan - blinking- blue .
OR - I install linux - http://msbd.de/dns313/Install_en.rtf
-
I purchse my DN-313, completly new and have the same problem, the reset button do nothing, the hhd led is green , power is blue and network is blink.
i try the installation CD and unable to find the DNS-313, no ping, also i try SNMP and nothing
but USB works very fine,
there is some way to factory reset via USB???
-
I don't know if this is the correct solution but works for me.
1) don't use the CD, download the software from the dlink US page
2) use the DCC Dlink Click n Connect (must be at least the version 1.02)
3) download the new firmware from dlink.ru DNS-313_2008.12.07-1421__1.03b04v2
http://ftp.dlink.ru/pub/NAS/DNS-313/Firmware/DNS-313_A2_FW_v1.03/
4) modify the file firmware.ini in the line firmware= (when you download the DCC 1.02 you see this file) to point to the new firmware that you download from dlink.ru
[system]
firmware=DNS-313_2008.12.07-1421__1.03b04v2
now run the dcc
works for me using WXP sp3,
enjoy you NAS
and DLink, please fire someone, because the CD in the box is a piece of $#@#
-
Hello, just one more thing you can check: since a power cycle is what started the problem, if DNS323 is getting IP address via DHCP from your router, it may have been given a new IP address. If any of your computer has mapped the NAS with numeric IP address, it may result in you not able to 'see' the NAS on the network.