D-Link Forums

D-Link IP Cameras for Home => DCS series Network Cameras => Topic started by: meka on March 19, 2010, 07:12:13 AM

Title: MY DCS 2121 change the date at each boot up date is 1/1/2009
Post by: meka on March 19, 2010, 07:12:13 AM

every time I boot up  the DCS 2121 she reintianalise the date and time then I would require the regulation whenever
I do not know if this is normal or if it is a manufacturing problem?

I do not know if it contains a battery or not as the bios?
 thank you for your help

message translated by google translation

Title: Re: MY DCS 2121 change the date at each boot up date is 1/1/2009
Post by: Mackerel on March 20, 2010, 11:27:08 PM

I noticed the same thing on my DCS-920's. Could be by design... I do know that they can sync on NTP Time-service if they are open to the internet... Mostly the time recorded is by the recording App (DViewCam) or Mail-program... Sorry.

Title: Re: MY DCS 2121 change the date at each boot up date is 1/1/2009
Post by: FroggyKaf on November 16, 2010, 01:02:22 AM

Hi,

I noticed the same problem with DCS-2121 date/time reset to 1/1/2009 after each reset e.g. caused by a power failure.
Despite NTP is set in the configuration, it does not seem to retrieve the right date event after 2 days.

This is really annoying as I wanted to base my application only on the snapshot feature without external server which could use its own date to timestamp pictures ...

model : DCS-2121
firmware : 1.04

Title: Re: MY DCS 2121 change the date at each boot up date is 1/1/2009
Post by: ArJay on February 05, 2011, 01:38:50 PM

I noticed the same problem on my DCS-1100s and the DCS-1300.

The solution that worked for me was to add the second DNS entry on the Network screen.  I had only one.  It appears to be a unique requirement in the software.

Title: Re: MY DCS 2121 change the date at each boot up date is 1/1/2009
Post by: mclainbarbosa on February 13, 2011, 10:17:34 PM

The solution that worked for me was to add another DNS entry screen network. I had one. It seems to be a unique requirement for the software.