D-Link Forums
The Graveyard - Products No Longer Supported => DIR-655 => Routers / COVR => Europe DIR-655 => Topic started by: grezo on March 27, 2010, 04:22:29 AM
-
My wireless network disconnects every single day at around 03.18 why? i havnt change any settings in schedule. But after a ouple minutes it works again. can it be something with channel? changed it to "auto"
Dlink wireless: Wireless system with MAC address 002269xxxxxx disconnected for reason: Received Deauthentication
-
What channels in the neighbourhood ??
Use WPA2 Personal and AES. 63 character long key with all 128 acii signs.
Remember use ch 1-6-11 in us cause the are overlapping eatch other. 22MHz +-11Mhz.
-
What channels in the neighbourhood ??
Use WPA2 Personal and AES. 63 character long key with all 128 acii signs.
Remember use ch 1-6-11 in us cause the are overlapping eatch other. 22MHz +-11Mhz.
i dont know what channels my neightbourd uses, how can i find that?
I am using 802.11n only with WPA2 only and AES. I live in sweden.
-
anyone?
-
Hi,
You can use inSSIDer, find it here http://www.metageek.net/products/inssider (http://www.metageek.net/products/inssider)
-
Hi,
You can use inSSIDer, find it here http://www.metageek.net/products/inssider (http://www.metageek.net/products/inssider)
downloaded it and saw that i am the only one with different channel, i have 3 at the moment. and there are 3 wireless networks witth channel 11, how does that work? and there are 2 networks with channel 1.
My RSSI is between -45 and - 25 is it good?
-
My RSSI is constantly -50, so yours is fine, I guess the RSSI changes after how close you are to the router when you use the program.
Which firmware do you have on your dlink?
Are you using any wired connections? I have experienced reboots on my router, but it wasn't caused by the wireless network, and my reboots was not at regular intervals.
If I were you I would change/force my wirless channel to be on channel 6, to get further away from the 2 networks with channel 1.
-
My RSSI is constantly -50, so yours is fine, I guess the RSSI changes after how close you are to the router when you use the program.
Which firmware do you have on your dlink?
Are you using any wired connections? I have experienced reboots on my router, but it wasn't caused by the wireless network, and my reboots was not at regular intervals.
If I were you I would change/force my wirless channel to be on channel 6, to get further away from the 2 networks with channel 1.
I have 1.32EU firmware. and I have one wired desktop computer and one laptop.
why should i have channel 6? can my neightbours have channel 6 on their router when i have it ?