D-Link Forums
The Graveyard - Products No Longer Supported => Routers / COVR => DGL-4300 => Topic started by: BEARnWOLF on April 01, 2010, 09:57:24 PM
-
I just ordered this router, I really just bought 2 of them one to put up and one to use. I will be setting up a PS3 wired! not wireless! I have a static IP address assigned to my PS3 which will be 192.168.0.15 and I want to use the game fuel. I also want to open all the ports for the PS3. Can someone or all that have a ps3 or anyone help me out with whats the best way to setup this connection. I want it to take most of my bandwidth which at this time is DSL 1.2 down and 750 up speed. Thanks ahead of time!
-
UPNP will automatically open the necessary ports for you. If you want you can open all the ports using DMZ.
- Go to advanced/firewall
- Enable DMZ and then put in 192.168.0.15
- Save settings
To set the highest priority under game fuel the rule will be as follows
- Enable
- Name: PS3
- Priority: 1
- Protocol: Any
- Source IP: 192.168.0.15 to 192.168.0.15
- Source port range 1-65535
- Destination 0.0.0.0 to 255.255.255.255
- Destination range 1-65535
- Uncheck dynamic fragmentation
- Save
Make sure your automatic measured upload is close to what you should be getting as your upstream. If not manually adjust it.
-
hey man thanks! I read the help section on the router which I was amazed at! I never seen a router with all that in there. I walked through and your right, The setup you said works great! I had it configured a fews days now. Thanks
-
See this link in the 4500 forum, I used it with my 4300, works fine.
http://forums.dlink.com/index.php?topic=13109.msg77307#msg77307