D-Link Forums

The Graveyard - Products No Longer Supported => D-Link NetDefend Firewalls => Topic started by: zebra on April 05, 2010, 02:06:16 AM

Title: VPN between differente Dlinks
Post by: zebra on April 05, 2010, 02:06:16 AM

Hi alli,

It's possible to have a VPN between a

DFL 160 and HV804-DI
Or

DFL 160 and DFL-800

DFL 160 and DFL-1600



thanks for response

Title: Re: VPN between differente Dlinks
Post by: danilovav on April 05, 2010, 06:27:35 AM

Of cource, possible
Technically, DFL-160 - the same DFL-210/800/1600

For example, refer to FAQ about DFL-DIR IPsec - http://www.dlink.com/support/faq/default.aspx?question=DFL-800&page=2
I didn't found DFL-DI example on exglish, but look for screenshots from russian - http://dlink.ru/ru/faq/92/520.html

Title: Re: VPN between differente Dlinks
Post by: zebra on April 05, 2010, 07:11:12 AM

Thanks danilovav for your response, but the DFL 160 is very differente from all DLINKs !!!!

For VPN configuration there are the options:

IKE Mode: Main mode / agressive mode
DH Group:  DH Group 1/ DH Group 2 and DH Group 5
PFS: PFS desabled / PFS enabled
and if PFS is enabled you have the option: PFS DH Group 1; PFS DH Group 2 and PFS DH Group 5

there are all options for the configuration of the VPN !!!!

regards.

Title: Re: VPN between differente Dlinks
Post by: Fatman on April 05, 2010, 09:58:43 AM

They should both work, though you are correct that the DFL-160 is different than the rest of our DFL firewalls.

Follow that German document you found for the DFL-160 and the normal document for the other side and try to ensure that the settings match.

Any of our firewalls should be able to form a tunnel with any other product (ours or others) this is the reason we go out of our way to get VPN certifications.