D-Link Forums

The Graveyard - Products No Longer Supported => Network and WIreless Adapters => DWA-552 => Topic started by: titanle on April 05, 2010, 04:02:31 PM

Title: card recently stopped working
Post by: titanle on April 05, 2010, 04:02:31 PM
I've had the dwa-552 and 143 rangebooster running on my vista 64bit desktop for the last year or so without any problems, aside from the bitrate on the rangebooster always being very low.  A few days ago the 552 stopped showing up in the network connections box and it was just the 142 that was connected to my network.  I tried uninstalling and reinstalling, but now the neither the 142 or 552 will work.

The 142 wont go past the installation phase, it just says driver install fail and it wont go any further than that.  The 552 installs, but at the end of the install it asks for the card to be inserted when its already there. I have tried uninstalling and reinstalling using a couple different driver versions but no luck.

Sometimes it asks for the card to be inserted, and other times the install goes fine, it shows up in device manager, but if you go into connection properties it has ipv4 and ipv6 not connected and there is no internet connection.
Title: Re: card recently stopped working
Post by: titanle on April 06, 2010, 10:04:45 AM
Ok so after going through a bunch of different things, uninstalling, reinstalling, trying a bunch of different drivers I finally managed to get the 552 to work. I think it's the 1.30 drivers for XP that finally detected thecard and let me connect to the Internet. Now the only issue is that the speed is 54.0.
Title: Re: card recently stopped working
Post by: thecreator on April 12, 2010, 03:49:43 PM
Ok so after going through a bunch of different things, uninstalling, reinstalling, trying a bunch of different drivers I finally managed to get the 552 to work. I think it's the 1.30 drivers for XP that finally detected thecard and let me connect to the Internet. Now the only issue is that the speed is 54.0.

Hi titanle,

You have not mentioned the model number of the Range Booster?

Speed is not a function of the card, but of the Router and its Security Settings.

What Security Settings are you using?

Title: Re: card recently stopped working
Post by: titanle on April 13, 2010, 11:49:51 PM
oh its the dwa-552 card, dir 655 router.  Im using the wpa personal security setting.  I was getting decent speeds before but now its stuck at 54.0
Title: Re: card recently stopped working
Post by: thecreator on April 14, 2010, 06:38:54 PM
oh its the dwa-552 card, dir 655 router.  Im using the wpa personal security setting.  I was getting decent speeds before but now its stuck at 54.0

Hi titanle,

Are you using WPA or WPA2 Only! which gives you 300 Mbps? Post your Security settings, except the Security Key, itself.