D-Link Forums
The Graveyard - Products No Longer Supported => Routers / COVR => DGL-4500 => Topic started by: qlcr on April 10, 2010, 06:34:00 AM
-
我是A1硬件,原来的固件版本是1.02,我升级到1.22N后,无线隔几分钟就断开并且十分慢,有线部分也比原来要慢,比如浏览网页等,我希望D-LINK公司马上重新编写新的固件出来.面对用户的问题不要无动于衷,无所作为.
-
不让用户回滚到以前版本的firmware,是非常不道德和不人性的做法,应该在论坛上向用户说明原因,这是D-LINK公司的义务.用户有权力知晓内情,不应该武断地剥夺用户的这种选择权.
-
firmware V1.15是相对好用的固件,但它不能SAVE用户的设置,为何不能在此基础上fix它呢？
-
I agree that Dlink should post the reason why they do not support roll-back to 1.x from 1.2x firmware versions. I'm at 1.22 and it seems to be working very well for me but I do not use the USB shareport. You can try 1.22 and if you don't like it, there is a 1.15 version in one of the threads that allows you to downgrade to 1.15 and then reflash it with the dlink version of 1.15.
jerry
-
谢谢jerry．
但我FLASH v1.22N会导致网络变慢，无线变慢，而FLASH到v1.15或改低的版本后，网络会有很好改善，但1.15不能SAVE我的设置．
-
Are you saying you downgraded back to 1.15 from 1.22 and now you are not able to save your settings under 1.15? If you, try restoring the factory defaults. What browser are you using? I've experienced a similar problem using Safari on my Macs. Most of the time it will save the settings but their are some pages that it won't. When I'm not able to save my settings on a specific tab, I switch to firefox and then I'm able to save the settings on that page. You might want to try a different browser.
-
谢谢vlj9r。我用的就是firefox。
-
我FLASH到1.15,换其它浏览器后，可以SAVE自己的设置了。谢谢上面帮助我的好兄弟。
-
其实，DGL-4500是一款非常棒的路由器，我很喜欢它。要是D-LINK公司的工程师及时把firmware的无线和有线再优化完善一下就好了。