D-Link Forums
The Graveyard - Products No Longer Supported => D-Link NetDefend Firewalls => Topic started by: hany_bw on May 17, 2010, 02:43:17 AM
-
can any one help me i need a step by step setup for the DFL-800
i got 2 internet lines (no fixed ip)
i don't know what i should do and what addresses i should use for them to make them available for use ?
also i don't know what to do in the DFL-800 to make all network see internet
i try the setup wizard but no success
i'm new in network field so help me plz ??? ??? ??? ???
-
What you want to have - load balancing or favorier?
-
balancing plz ::)
-
1) Interfaces > wan1
Check "enable DHCP client"
On Routing tab, check off "automatically add default route if gw is specified"
Do the same for wan2
2) Intrefaces > Interface groups
Make group "wans" with wan1 and wan2
3) Rules > IP rules > lan_to_wan1
Change in all rules destination interface from wan1 to wans
4) Routing > Routing tables > main
Add routes (keep "local IP address" blank and enable host monitoring with DNS servers or some external stable host)
wan1 all-nets wan1_gw 100
wan2 all-nets wan2_gw 100
5) Routing > Route load balancind > Instances
Add new instance on table "main" with algorithm "destination"
It's minimal RLB configuration.
-
thanks i'll try it and i'll return to tell u the result
-
??? ??? ??? ??? ???
not working
i'll
the 1st DSL line router ip is 192.168.2.1. DHCP server enable
the 2nd DSL line router ip is 192.168.3.1. DHCP server enable
i don't have fixed IP also i don't have DNS from the ISP
what's missing ?????
??? ??? ??? ??? ??? ??? ??? ??? ??? ??? ??? ??? ??? ???
-
1) Show Status > Routes
2) Try to ping something by IP (ex, 8.8.8.8)
-
i did, all i can get is local IPs but when i try to get outside the network i don't get any connection
i can't even get to the router screen.
i need a step by step setup for beginner or maybe a lower than the beginner
i need to know what to do from the beginning plz :'( :'( :'( :'( :'( :'(
-
i did it thnx for your help ;D ;D ;D