D-Link Forums
Software => Shareport - Windows => Topic started by: Johnse45 on May 19, 2010, 07:46:11 AM
-
I have D link DP 300U print server connected via cable to my Network, it has a Epson LQ850(parrelle port) and a HP Laser Jet 1200(USB) printers connected. All my others PCs (OS Win XP SP3) print to these printers without problem expect the 1 with Windows 7 Basic as the OS. I can't get the printers to connect to the PC, even though the Print Server is detected in the devices. I can see the Print Server settings thru Web browser, but cannot print. The DP 300U is assigned a manual IP address 192.168.1.10, all PCs use automatic IPs.
Where could i have gone wrong? Please help.
-
Hi,
On the wonky pc, Look at the PORT assignment under Printer Properties and see if it matches what you think it should be.
Also, when I added my little print server (not the one you have, but probably similiar in function), the port configuration got set to RAW and my gizmo needed an LPR data-stream for it to see the printer properly, so I had to change the setting from RAW to LPR and then give it some Que name, which I used iP4500...and it began to connect immediately.
-
have checked under the port property, the TCP IP is the same as the printer server, also have changed the settings to LPR and assigned a queue name. The test print works fine, but when pc is restarted, the printer goes OFFLINE and cannot respond. Thanks