D-Link Forums
The Graveyard - Products No Longer Supported => Routers / COVR => DIR-855 => Topic started by: JPF12 on May 29, 2010, 10:38:44 AM
-
When I change my wireless settings it will give: "Changing wireless security settings may cause Wi-Fi protected Setup to not function as expected".
Did change everything but it will not disappear when changing something in the wireless settings that ends with a "save".
The other problem is my 855 display, it tells me the 5 GHz setting is 11a only (while webacces tells me 11n only). I tried to switch it by webacces to 11a, stays 11a on display. Only 11a/11n mixed will give the right display of the mix.
Somewhere there must be a connection with the error above I asume.
Who had it, who did it, who can tell me more???
2.4:
AGN mixed
20/40 MHz
Personal WPA/WPA2 - AES
5.0:
N-only (display tells A-only...)
40 MHz
Personal WPA2 only - AES
-
When I change my wireless settings it will give: "Changing wireless security settings may cause Wi-Fi protected Setup to not function as expected".
Did change everything but it will not disappear when changing something in the wireless settings that ends with a "save".
The other problem is my 855 display, it tells me the 5 GHz setting is 11a only (while webacces tells me 11n only). I tried to switch it by webacces to 11a, stays 11a on display. Only 11a/11n mixed will give the right display of the mix.
Somewhere there must be a connection with the error above I asume.
Who had it, who did it, who can tell me more???
2.4:
AGN mixed
20/40 MHz
Personal WPA/WPA2 - AES
5.0:
N-only (display tells A-only...)
40 MHz
Personal WPA2 only - AES
I can only say that I have the same problem.
:(
-
I am not sure but the 2.4 Ghz settings might not be set correctly. 2.4 Ghz radio signals can normally only be used with B, G and N wireless networks. 5.0 Ghz radio are used, in general, with A wireless networking and newer dual-band N networks.