D-Link Forums
D-Link IP Cameras for Home => DCS series Network Cameras => Topic started by: jzzon on June 20, 2010, 04:50:53 AM
-
can somebody help me with remote viewing dcs 5220 ?
ive tried dlinkddns
but it doesnt help
when i tried opening it
it redirects to TP-link setup although i have linksys router..
and i dont have any DVR or any reording system like NAS
thx
-
Hey
A bit of more detail would help... but by now..
what ip address are you placing in the ddns?
in the router have you setup the ddns and por forward?
-
I have done this with the DCS6620 & 5300.
Camera:
Set an HTTP port (e.g. 1025) - pick one that is not is use
Set the IP address (e.g. 192.168.1.105) - these are usually set for you at first, pick one that is not in use
save that
Router:
Go to port range forwarding (it is under apps & gaming tab for my Linksys router)
The start and end ports are the same and what you gave the camera (e.g. 1025)
The IP address is the one you gave the camera (e.g. 192.168.1.105)
save that
Go to the status tab and find the IP address (e.g. 11.22.33.44) your ISP is giving you (this can change, but generally stays the same for a while)
Use that to get into the port (e.g. 11.22.33.44:1025)
Hope that helps or gets you in the right direction.