D-Link Forums
The Graveyard - Products No Longer Supported => D-Link NetDefend Firewalls => Topic started by: MJ313 on July 06, 2010, 04:46:17 PM
-
I know there are several step-by-step guides available for setting up an FTP Server on a DFL-210 DMZ port. I have followed those guides and simply can't connect to the public IP address of my server. I am hoping someone can point me to the likely error I am making.
I have the following configuration:
Static settings provided by ISP:
IP1 - xxx.xxx.104.18
IP2 - xxx.xxx.104.22
NetMask - 255.255.255.248
In my DFL-210, I have configured
wanIP - xxx.xxx.104.18
wanNet - 255.255.255.248
dmzIP - 172.17.100.254
dmzNet - 255.255.255.0
lanIP- 192.168.1.1
lanNet - 255.255.255.0
DHCP is fully operational
Here's what I did to try and get the FTP Server running on the DMZ
1. Added IP4Host: 'FTP_Server'; IP Address 172.17.100.253
2. Added IP4Host: 'Wan_Pub_IP2'; IP Address xxx.xxx.104.22
3. Added ARP Entry (Mode: Publish; Interface: WAN; IP Address: 'Wan_Pub_IP2')
4a. Added IP Rule: WAN_to_DMZ -
'FTP_Map'
SAT
ftp_inbound
SI: any
SN: all_nets
DI: WAN
DN: 'Wan_Pub_IP2'
Under SAT tab: Destination: 'FTP_Server'
5. Added IP Rule: WAN_to_DMZ
'Allow_FTP'
Allow
ftp_inbound
SI: any
SN: all_nets
DI: WAN
DN: 'Wan_Pub_IP2'
6. Save and Activate.
I can only access the server via FTP, IF I connect from LAN, and only by connecting with the non-Public IP address.
I would greatly appreciate any help or advice. I am hoping I overlooked something basic, as this seems like a trivial thing to do, in theory.
Thank you very much-
-
OK, so all I had to do was optimize my IP rules order. Problem solved.
I apologize for being stupid.