D-Link Forums

The Graveyard - Products No Longer Supported => D-Link NetDefend Firewalls => Topic started by: crobison on July 18, 2010, 06:26:22 AM

Title: DFL-210 VPN Client to Site
Post by: crobison on July 18, 2010, 06:26:22 AM

I used the vpn DFL-210, DFL-800, DFL-1600 How To Setup PPTP VPN Between Windows PPTP Client and the Firewall instructions.  I setup the Microsoft VPN Client and I am able to login no problem, but the IP that is assigned is the one configured for vpn on the firewall.  The issue is that it is not assigning a gateway or dns to be able to access the internal network..  I am 99% of the way there, just need to know what I have to configure to get the gateway and dns.. 

Thanks you..

Title: Re: DFL-210 VPN Client to Site
Post by: danilovav on July 19, 2010, 12:53:46 AM

Do you want to have Internet thru DFL when you're connected?

Title: Re: DFL-210 VPN Client to Site
Post by: Fatman on July 19, 2010, 08:48:57 AM

You do not need a gateway for PPTP traffic, all traffic egresses over the tunnel.

If you need a DNS it goes under Interfaces->PPTP Server, its on like the 3rd tab or so.

Title: Re: DFL-210 VPN Client to Site
Post by: crobison on July 23, 2010, 09:36:05 AM

Then why can I not ping the computers inside the network?

Title: Re: DFL-210 VPN Client to Site
Post by: danilovav on July 23, 2010, 12:04:27 PM

Show Status > Routes from DFL after you got connect thru PPTP.

Title: Re: DFL-210 VPN Client to Site
Post by: crobison on August 02, 2010, 11:27:33 AM

Issue was resolved, thank you..