D-Link Forums

The Graveyard - Products No Longer Supported => Access Points / Extenders => DAP-1522 => Topic started by: EdwinDonald on July 22, 2010, 02:58:41 AM

Title: How to add DAP-1522 to DGL-4500 network using WPS?
Post by: EdwinDonald on July 22, 2010, 02:58:41 AM

I have a DGL-4500 and just received the DAP-1522 that I want to use as a bridge. I like to use the convenient WPS (Wi-Fi Protected Setup), however, I am a bit confused how to do this. Is it as simple as 1) press the WPS button on the DGL-4500, which will start blinking, and then 2) press the WPS button on the DAP-1522?
Or, do I first go into the web-utility screen of the router (DGL-4500), active WPS there, then press WPS button on DGL-4500, and then press WPS button on DAP-1522. Do I have to enter the PIN at one point as well?
__________________________________________________
Buick quick strut (http://www.autopartsgate.com/buick.html)
Buick complete strut assembly (http://www.autopartsgate.com/buick.html)
Ford  complete strut assembly (http://www.autopartsgate.com/ford.html)

Title: Re: How to add DAP-1522 to DGL-4500 network using WPS?
Post by: marvan on September 14, 2010, 09:07:13 PM

You can check the Quick Installation Guide which can be downloaded from Dlink.  The steps written in the QIG is press WPS on DAP-1522 then press WPS on router.