D-Link Forums
The Graveyard - Products No Longer Supported => D-Link Storage => DNS-323 => Topic started by: mulczas on August 26, 2010, 11:31:36 PM
-
Hello, I'm from Poland. I have a problem, DLINK SUpport suggested upgrade firmware orygnial was 1.07 on 1.08 when install 1.08 suspended Internet explorer, access to dns323 not available.. I attempted reset dns323-nothing, address ip or 6 least mac address in web browser nothing .help me
-
Try the easysearch utility from the CD or search your device on UPnP.
-
In Easy search not available, and i install advanced scanner ip, also nothing...
-
In Easy search not available, and i install advanced scanner ip, also nothing...
Ups, doesn't sound very good.....
Did the firmware update show any errors or did it end incorrectly?
-
Any errors, when update firmware was 100% but I don't see button restart (120sek)...suspended...Firmware oryginal 1.08 with dlink.pl
-
Try these steps:
1) reset the device one more time for 10 seconds
2) power off and on the device
3) connect the device to a computer
4) assign static ip 192.168.0.12
5) ping the broadcast address
6) do arp -a
-
After assign ip 192.168.0.12 ping was ok, 100%, but arp nothing found
-
Can you ping 192.168.0.32?
-
Ping 192.168.0.32 not available my pc ip 192.168.0.12
-
one last thing that you can try:
1) assign static ip on pc 169.254.10.10 (just in case the dns323 doesn't have a static ip anymore for some reason)
2) ping 169.254.255.255 -t
3) arp -a
4) check if your dns is still there
if it's not then there's a big chance that your dns is defective.