D-Link Forums

The Graveyard - Products No Longer Supported => D-Link NetDefend Firewalls => Topic started by: javito on September 02, 2010, 01:07:19 AM

Title: Connect Internet from DMZ
Post by: javito on September 02, 2010, 01:07:19 AM

Good morning, excuse my English,
I have a problem, configure a dfl-210 with a dmz to a web server and mail server,
from wan to dmz is ok, but I have no internet access from a web server
them the rules I have are

wantoweb         sat http_all wan/allnets core/allnets
wantoweballow  Allow https_all wan/allnets core/allnets
wantomail         sat mail-services wan/allnets  core/allnets
wantomailallow  allow mail-services wan/allnets core/allnets
dmztowan       ***** I dont know***** Nat/Allow  dmz/dmznet  wan/allnets

configuration of interfaces address is

wanip  192.168.10.8
wannet 192.168.10.0/24
wangw 192.168.10.7 (router adsl with nat all to wan ip)

lan 192.168.10.6
lannet 192.168.10.0/24

dmzip 172.100.100.254
dmznet 172.100.100.0/24
dmzgw *****

I dont have more routes o rules (except dmz to lan)

Any idea

Very Thanks.

Title: Re: Connect Internet from DMZ
Post by: danilovav on September 02, 2010, 12:03:41 PM

Your "dmztowan" rule is correct, but set action = NAT.
Also, set to server DNS to ISP DNS, not DFL's dmz_ip.