D-Link Forums

The Graveyard - Products No Longer Supported => Access Points / Extenders => DAP-1360 => Topic started by: Speedyswede on September 03, 2010, 01:34:55 PM

Title: DAP-1353 wont connect to admin page?!
Post by: Speedyswede on September 03, 2010, 01:34:55 PM

Hi!
I recently bought a D-link DAP-1353 AP. Its second handed and has rev A hardware. My problem is that it seems to be impossible to reach the admin webpage. I have tried to connect it directly to my pc via cable. And I assigned my pc a fixed ip within same range as the AP. I have disabled my Norton NIS2010 firewall. But no connection. I have resetted the AP a couple of times...
I have run out of ideas what the proble can be.... Any ideas?

Win7 Proffesional
IE8 (Java installed and enabled)
Norton Internet Security 2010  

Title: Re: DAP-1353 wont connect to admin page?!
Post by: !!!!clarkkent on September 06, 2010, 02:19:03 AM

try the following:

A) http://192.168.0.50
B) http://dlinkap
C) Start > Computer > Network
D) ping the broadcast address and do arp -a

Title: Re: DAP-1353 wont connect to admin page?!
Post by: cpastoft on October 23, 2011, 12:26:20 PM

Hi everyone,

I have the exact same problem with my DAP-1353. Did you ever find a solution?

Title: Re: DAP-1353 wont connect to admin page?!
Post by: thexy on January 29, 2013, 12:31:10 AM

I am sorry that I write in an old topic. I had the same problem, which is due to the fact that between 8 and 16 pin on 74hct123d the voltage was 3.3v. I disconnect the 16-pin from 3.3v then connected it directly to 5V.Тhen I replaced all electrolytic capacitors. Аnd now the device is working properly. I hope this post can help someone :)

Title: Re: DAP-1353 wont connect to admin page?!
Post by: FurryNutz on January 29, 2013, 07:40:27 AM

Awesome info, thank you for sharing.  ;)

Enjoy.