D-Link Forums

The Graveyard - Products No Longer Supported => Network and WIreless Adapters => DWA-552 => Topic started by: Comet35 on September 07, 2010, 11:15:38 AM

Title: No hardware detection after pc restart
Post by: Comet35 on September 07, 2010, 11:15:38 AM

Hi there,

I've had this card working perfectly on 3 separate occasions and have tried using the dlink, aetheros, amd stock windows drivers.

My problem is that as soon as I get it working, when I restart the card is no longer detected in the device manager.

Reseating the card has appeared to make it detect it again on occasion, but once again, as soon as I restart it loses all detection.

I'm using Windows 7 64-bit and an Asus UD3R LGA 1366 mobo.

Title: Re: No hardware detection after pc restart
Post by: !!!!clarkkent on September 07, 2010, 07:09:38 PM

What driver version are you using?

Title: Re: No hardware detection after pc restart
Post by: rekd0514 on September 10, 2010, 01:04:21 PM

Try shutting down the computer and turning off the switch on the power supply if you have one. Leave it off for a few minutes. Also removing the CMOS battery will work. Restart and see if it detects it.