D-Link Forums
The Graveyard - Products No Longer Supported => D-Link Storage => DNS-323 => Topic started by: Rodney Chops on September 14, 2010, 01:51:27 PM
-
The other day, my I noticed my DNS-323 was off, and now it will not turn on. I've tried unplugging it, and letting it sit for a while, and the reset button. But I can't get it to turn on at all... No lights, no nothing.
My place has had the power go out lots, but I have a really nice surge protector on all my gear. The 10 other electronic pieces on the same power bar are fine. But thats all I can think of that got it... Any idea on how it can get rolling again or is it toast?
Ran good for well over a year now.
-
First off, I'd check the power supply brick and see if it's putting out the proper voltages. If not, that may be what you need. Otherwise, it's probably internal.
-
I have a volt meter, but I can't get any reading out of the end of the brick. I suppose that means its toast I guess. I'm not all that electrically inclined though.
-
If it is working it should have a green light on it (assuming allmodels have this). No technical knowledge or equipment required :)
-
Well, if the brick died, it's cheaper than the NAS dying. :) You can get a replacement from D-Link.