D-Link Forums
The Graveyard - Products No Longer Supported => D-Link Storage => DNS-343 => Topic started by: JavaLawyer on October 20, 2010, 04:25:50 AM
-
It looks like 3TB internal HDDs are finally here. This should delay the storage concerns for those of us who believe 8TB (4 bays x 2 TB) isn't enough.
Western Digital Shipping World's First Internal 3TB Hard Drive
We've been stuck at 2TB for what seems like forever, and there's good reason for that. Drive partitions larger than 2.19TB create a unique problem for PCs, and trying to boot from them requires a mish mash of technologies, including the use o***PT partition, a modern 64-bit OS (Vista or Windows 7), and a motherboard equipped with an EFI BIOS.
Despite all this, Western Digital has gone ahead and begun shipping a 3TB hard drive in Caviar Green trim, which qualifies as the largest capacity internal SATA drive around. The drive utilizes four 750GB platters as well as Western Digital's Advanced Format technology, which you can read more about here.
To sidestep the issue of integrating large capacity hard drives into your system, Western Digital also bundles an Advanced Host Controller (AHCI)-compliant Host Bus Adapter with its 3TB (and 2.5TB) hard drives, which makes it easier for OSes to locate and use a known driver with correct support for large capacity drives. In other words, you can actually boot from the thing without any crazy voodoo.
The 3TB drive is available now for for $240, while the 2.5TB drive sells for $190.
http://www.maximumpc.com/article/news/western_digital_shipping_worlds_first_internal_3tb_hard_drive (http://www.maximumpc.com/article/news/western_digital_shipping_worlds_first_internal_3tb_hard_drive)
-
if this is an advanced format drive it will not work
-
With the on-board controller, do you think the DNS-343 could format this for use as a standard volume (i.e. not RAID)?
-
Reading on the website, the advance format, has a setting, for it to be retro compatible with XP.
My thoughts, is if we were not enable the advance format, maybe a simple firmware upgrade similar with the 1.5TB, 2TB issue we had earlier could fix the issue with 3Tb harddrives in the DNS
Link, to show the advance format has a enable setting jumper
http://wdc.custhelp.com/cgi-bin/wdc.cfg/php/enduser/std_adp.php?p_faqid=1679&p_created=&p_cats=185&p_cv=1.185&p_pv=2.294&p_prods=227%2C294#jumper
Thoughts??
-
IMHO, a DNS-343 firmware update addressing the advanced formatting issue in these higher capacity HDDs is highly unlikely.