D-Link Forums
The Graveyard - Products No Longer Supported => Routers / COVR => DIR-615 => Topic started by: eedork on October 21, 2010, 11:52:17 AM
-
I just upgraded my firmware from 3.12NA to 3.13NA and it appears that IPv6 functionality has now stopped working. Specifically, the DIR-615 no longer sends Router Advertisements on the LAN, and I am unable to get it to send any DHCPv6 packets on the WAN. I have tried resetting the unit to factory defaults through the web interface and also using the switch on the back panel. Neither worked.
Has anyone else had any issues with IPv6 in the latest 3.13NA firmware?
Thanks.
-Matt
-
Upon upgrading the firmware from 3.12 to 3.13, I found that my 6in4 tunnel no longer worked. (It's labelled "IPv6 in IPv4 Tunnel" in 3.12, and something slightly different in 3.13). Oddly, the DIR-615 Web interface seemed to keep dropping my setting for "Local IPv6 Address". I also tried configuring a 6to4 tunnel. There weren't any glitches with the settings there. However, in both cases, IPv6 remained completely inactive. I couldn't even ping6 the router via the link-local address.
I decided to roll back to 3.12.
-
Bonjour,
I also made the update of 3.12NA to 3.13NA. Since, I am incabable to connect in Internet. I put back (handed) the version 3.12 and everything is OK. Small bug with 3.13 ???
Thank you,
Esprit
Traduction avec www.reverso.net :D
-
... I found that my 6in4 tunnel no longer worked. (It's labelled "IPv6 in IPv4 Tunnel" in 3.12, and something slightly different in 3.13). Oddly, the DIR-615 Web interface seemed to keep dropping my setting for "Local IPv6 Address".
Same here: 3.13 seems to lose the setting for the local IPv6 endpoint, making the tunnel disconnected.
3.11 is the last firmware that has worked ok for me, as also 3.12 was problematic.
-
It is unfortunate that the latest firmware has issues with IPv6. The DIR-615 C1 was one of the few commercially available routers with IPv6 support.