D-Link Forums
The Graveyard - Products No Longer Supported => Routers / COVR => DIR-655 => Topic started by: tdean on November 12, 2010, 01:03:08 AM
-
i have the DWA-552 card updated atheros drivers (9.1.0.100), running firmware 1.34 on the router, 20/40 set, only n mode and aes encryption. im running win 7 32 bit.
heres my status:
SSID MAC Address IP Address Mode Rate (Mbps) Signal (%)
MetalHouse XXXXXXXX 192.168.0.190 802.11n (2.4GHz) 81 98
I posed this a few days ago in the DWA-522 forum and didnt get any responses, i hope the double post is ok.
-
Try all channels for the best connection. Possibly other AP's in the neighbourhood also use your current channel.
-
channel seems good... its at 96-100%. you mean channel scan?
-
channel seems good... its at 96-100%. you mean channel scan?
Chosse a channel manually and do this with all channels. See which one is best.
-
Chosse a channel manually and do this with all channels. See which one is best.
Hi Eddie,
Channel 11 is the best, but might vary from location to location.
-
Hi Eddie,
Channel 11 is the best, but might vary from location to location.
Depends on how many neighbours are actually also using this channel :)
-
Depends on how many neighbours are actually also using this channel :)
Hi Eddie,
I had the time, so I experimented around and when through the Channels. Channel 11 gave me 240-270 Mbps range and the others were slower.
But like I said, one needs to experiment around with the available Channels, then monitor the speed from the Router, under http://192.168.0.1/Status/Wireless.shtml (http://192.168.0.1/Status/Wireless.shtml).