D-Link Forums
The Graveyard - Products No Longer Supported => D-Link Storage => DNS-323 => Topic started by: racoon31e on November 12, 2010, 01:10:48 AM
-
Hi all.
I have a DLink DNS323 with firmware 1.08 set up in standard configuration with 2 x 1TB Samsung F3 HDDs. I am using Windows Vista Ultimate x32 SP2.
They were mapped by the Easy Search Utility into Y:\ (Volume 1) and Z:\ (Volume 2), and both have been working fine for the past 2 months.
However today, Y: cannot be seen in My Computer under Network Location.
When I used the "net use" command in cmd, it returns this:
New connections will be remembered.
Status Local Remote Network
-------------------------------------------------------------------------------
Unavailable Y: \\DNS-323\Volume_1 Microsoft Windows Network
OK Z: \\DNS-323\Volume_2 Microsoft Windows Network
The command completed successfully.
However when I went into the Network and Sharing Center in Control Panel, I could access DNS323, open Volume 1 (Y:\) and drop and delete files inside.
Additionally, I have tried powering off and on both my PC and my DNS323 but to no avail.
Also, this problem occurred after I installed the packaged DriveClone Pro and restarted the PC as according to installation instructions.
What is this problem and how can I fix this please?
TIA!
Addendum - Additional info from the Status Page:
HARD DRIVE INFO :
Total Drive(s): 2
Volume Name: Volume_1
Volume Type: Standard
Total Hard Drive Capacity: 983454 MB
Used Space: 75 MB
Unused Space: 983378 MB
Volume Name: Volume_2
Volume Type: Standard
Total Hard Drive Capacity: 983454 MB
Used Space: 75 MB
Unused Space: 983378 MB
PHYSICAL DISK INFO :
Slot Vendor Model Serial Number Size
Right SAMSUNG HD103SJ S246J1BZ601689 1000 G
Left SAMSUNG HD103SJ S246J1BZ601680 1000 G
-
Have you tried removing the mapping to them and accessing them through Network Places? You can also remove the mapping and then relink it.