D-Link Forums
The Graveyard - Products No Longer Supported => Routers / COVR => DIR-655 => Topic started by: Budmn8 on November 27, 2010, 04:47:25 AM
-
I tried to replace A older model of a Dir-655(hw a.3 firm 1.21) with a Dir-655 (hw a.4 firm 1.32na) well under no circumstances can I get new router to recognize Internet will new model. I have tried everything.
I have tried several setups (auto and manual) and all seams fine. But It never connect to a network. and my device status page under Info always says it is trying to establish a network status
also I can never get any numbers to show up on same page in Mac,Ip,Subnet,default,primary and secondary numbers even when I enter all the info in setup and click save.
Tried resetting new router every-way possible .Tried loading old settings from A.3 but that will not work
Any Ideas?
Thanks
Bud
-
Using ADSL or LAN from ISP ? Use Dynamic IP and if you have other router used, use MAC from that router.
If ADSL=Rebot modem and then router. Use Dynamic IP
IF LAN= Relese/renew
-
I tried to replace A older model of a Dir-655(hw a.3 firm 1.21) with a Dir-655 (hw a.4 firm 1.32na) well under no circumstances can I get new router to recognize Internet will new model. I have tried everything.
I have tried several setups (auto and manual) and all seams fine. But It never connect to a network. and my device status page under Info always says it is trying to establish a network status
also I can never get any numbers to show up on same page in Mac,Ip,Subnet,default,primary and secondary numbers even when I enter all the info in setup and click save.
Tried resetting new router every-way possible .Tried loading old settings from A.3 but that will not work
Any Ideas?
Thanks
Bud
Hi Budmn8 or Bud,
Was your older version still working, before you decided to replace it?
My same model is still going strong.
It has been up for over 30 days and still counting.
-
Using ADSL or LAN from ISP ? Use Dynamic IP and if you have other router used, use MAC from that router.
If ADSL=Rebot modem and then router. Use Dynamic IP
IF LAN= Relese/renew
That did the Trick Thank You! also was able to update to 1.34na with the same process.
Thanks Again!
Bud
-
Hi Budmn8 or Bud,
Was your older version still working, before you decided to replace it?
My same model is still going strong.
It has been up for over 30 days and still counting.
It was working BUT EVERY Saturday between 11 AM and 4 PM My wireless would crash. and It was suggested to get to newest firmware possible
I also want to Create a wireless Bridge for a Canon IP Camera and wasn't going to spend the $ if I couldn't get thru crashing problem
I made it thru today without a crash so I am getting a little confidence. First Saturday in 6 weeks
Bud
-
That did the Trick Thank You! also was able to update to 1.34na with the same process.
Thanks Again!
Bud
Your welcome ::)