D-Link Forums

The Graveyard - Products No Longer Supported => Routers / COVR => DIR-655 => Topic started by: woodsptw on May 04, 2008, 08:12:17 PM

Title: Directv configuration for downloads
Post by: woodsptw on May 04, 2008, 08:12:17 PM
Any tips for configuring the router to ensure video on demand downloads have priority? 

My router is lan connected to the HR-20 for on-demand services.

Title: Re: Directv configuration for downloads
Post by: TaVARUS on May 05, 2008, 07:48:57 AM
You should make a QoS Rule (Priority of 127 or lower) based on the IP Address (Static) that you have assigned to the HR-20; define the port(s) as "Both" (UDP and TCP). If you allowing the HR-20 to pull an dynamic IP Assignment from the built-in DHCP Server on the DIR-655, then, go to the SETUP tab and the NETWORK SETTING page; once there, define a DHCP Reservation for the HR-20. The Reservation will insure that the HR-20 is given the same IP Address everytime; that way your QoS Rule will be correct for the HR-20 device.

If your like me you could open the WebUI of the Router and go to the STATUS tab and the INTERENET SESSION page, to see what ports the HR-20 is actually communicating on; these may require more time. This process is a bit tedious, and if the HR-20 is not using the same ports everytime... well... then, it my be futile to attempt this.

I'll look into the communication process of the HR-20, and effectively... the "HR" series as a whole, a bit further, and post back with updated info. Thank you for the post! Please keep us informed of any updates.


P.S. ...The INTERNET SESSION page also has a QoS "Priority" Column which will allow you to view the actual priority of each Internet communication; as well as, an "Direction" Column to show if it is Egress (Outbound) or Ingress (Inbound) to and from the Internet.