D-Link Forums

The Graveyard - Products No Longer Supported => Routers / COVR => DIR-655 => Topic started by: oranges on July 03, 2008, 06:33:15 AM

Title: bridge mode?
Post by: oranges on July 03, 2008, 06:33:15 AM

My job is setting me up with a hardware vpn...i think using a cisco asa. I was planning on putting my dir-655 into bridge mode....and then I searched for the specifics.


Is there going to be anyway for me to use my 655 for my wireless access point connect to a cisco asa? Or am i screwed.

Title: Re: bridge mode?
Post by: Optix1180 on July 03, 2008, 09:03:43 AM

You may have to disable the disable the DHCP server on the DIR-655 and change the IP address of the router to match your cisco network. But the DIR-655 is a good router and disabling the DHCP will kill most of the functions ( a wireless switch)

Log into 192.168.0.1 then go to the setup tab and then on the left hand side choose Network Settings to disable the DHCP server and possibly changed the Lan IP address as well. You may also have to Open ports to allow for VPN passs thru.

Title: Re: bridge mode?
Post by: oranges on July 11, 2008, 10:06:57 AM

thanks that worked  :)