D-Link Forums
The Graveyard - Products No Longer Supported => Routers / COVR => DIR-615 => Topic started by: leslie0629 on January 02, 2011, 09:22:58 PM
-
Hi guys,
Is anybody having issues with the Rev E1 and PPPoE? On DD-WRT, it says "Connection type: Disabled" everytime I press connect. I flashed it through the emergency room. Should I be flashing the regular firmware after using the conversion bin?
-
Hi guys,
Is anybody having issues with the Rev E1 and PPPoE? On DD-WRT, it says "Connection type: Disabled" everytime I press connect. I flashed it through the emergency room. Should I be flashing the regular firmware after using the conversion bin?
ftp://dd-wrt.com/others/eko/BrainSlayer-V24-preSP2/12-24-10-r15962/dlink-dir615e1/dir615e1-factory-to-ddwrt-firmware.bin is for flashing from factory firmware to DD-WRT for the first time, or through the emergency room.
ftp://dd-wrt.com/others/eko/BrainSlayer-V24-preSP2/12-24-10-r15962/dlink-dir615e1/dir615e1-firmware.bin is for update to a new version from the DD-WRT interface, if you already have DD-WRT installed.
The ones I linked are currently the latest version for your revision.
I use PPPoE, it reconnects on reboot and doesn't have any troubles. Here are my settings: http://forums.dlink.com/index.php?topic=13599.msg96626#msg96626 Maybe you need to inform your ISP of MAC address changes, but most should detect these changes automatically.
-
Thanks Skello; I tried what you listed, but it still flashes "Connection Type: Disabled" after clicking "Connect" from the status page.
The strange thing is though, the factory D-Link firmware works for me - PPPoE connects without a hiccup, which leads me to believe that it might be an issue with DD-WRT, but you have it working - is there some setting I'm missing besides what you've listed?