D-Link Forums
The Graveyard - Products No Longer Supported => Routers / COVR => DIR-615 => Topic started by: Hellfog on January 14, 2011, 05:42:31 AM
-
Have tried WEP and WPA/WPA2 nothings works. Just says "Unable To Connect To a Network" It works on others wifi.
QoS is Off
On mixed b and g
SPI is disabled
-
Try single mode G only.
Will it connect if you TEST with out any security?
You might want to try setting a Static IP address if you can get it to connect with out the security. Once you assign it a static IP address, then set security and test again. Let us know.
-
There is no single mode G option. "n Only, Mixed g,b and Mixed g,b,n"
No difference without security.
-
What hardware rev do you have?
What FW is currently loaded?
-
hardware rev whats that?
FW: 4.12 updated it yesterday, no difference before.
When you say setting a Static IP address you mean on the router or ipod?
-
Look on the sticker on the bottom of the unit. there will be the model # along with a REV some after that.
I'm curious why your not showing a G only mode. There should be one.
Set a static IP on the router. You could try putting on in the iPod too as a test.
-
D3
-
Hmm... interesting. Well from what I can tell there should be a G mode only option. Wonder if you have an odd Rev here. Well the iPod should connect. I presume you have connected the iPod to other WiFi and it werks there?
-
Yes it works on others networks.
-
Try manually adding an IP adderss to the iPod and see if it will connect...
-
Not working. I'm getting tired of this not working.
-
This router new or something you've had for a while?
Lets try checking on the following:
Log into the router and go into Advanced and Advanced Wireless.
See if WLAN partition is checked as enabled.
Go ahead and uncheck Short GI.
Got back to Setup and Wireless settings:
Uncheck AutoScan and set the channel for 11.
Verify that you don't have G Mode only. Ensure that the view of the drop down menu can be seen fully, sometimes the menu options get hidden. Scroll down. There should be a G mode only option.
-
The router new like a month or so never had one before.
-
OK i unchecked Short GI, can't find WLAN partition.
Is "Enable Auto Channel Selection" AutoScan?
In wireless mode there are only 3 to choose from "n Only, Mixed g,b and Mixed g,b,n" g doesn't exists in the list.
-
Holy f*** its working now.
Thank you so much for the help. The last things seems to the trick.
-
Kewl, glad it's working for ya.
I presume aht Enable Auto Channel Selection is Auto Scan.