D-Link Forums

The Graveyard - Products No Longer Supported => D-Link NetDefend Firewalls => Topic started by: hana on January 26, 2011, 01:47:47 AM

Title: Creating multiple wan interfaces on DFL-210
Post by: hana on January 26, 2011, 01:47:47 AM

I have a DFL-210 firewall (one WAN port) and many public IP addresses in two ranges (with two different gateways). Lets say they are:

A. 123.111.222.0/29  (Gateway 123.111.222.6)
B. 123.111.333.81/28 (Gateway 123.111.333.81)

I want to use the A addresses for publicly addressed servers on the LAN, and B addresses for servers on the DMZ interface.

Is it possible? Can someone point out where to find a configuration guide? I cannot find such a guide on ftp://files.dlink.com.au/Products/DFL-210/REV_A/SetupGuides/

Title: Re: Creating multiple wan interfaces on DFL-210
Post by: silver_surfer30 on January 30, 2011, 11:29:19 PM

that should be possible by adding the second table  on wan interface using the routing menu.
but only one of the gateway will be used.

Title: Re: Creating multiple wan interfaces on DFL-210
Post by: chechito on March 10, 2011, 01:02:58 PM

the procedure implies many aspects:

You will need to publish any ip address you want to use as interface in the firewall using arp publish

Create respective interface and core routes and routing tables using appropriate local addresses.

Routing rules to chose which routing table use to the respective traffic incoming and outgoing.

Title: Re: Creating multiple wan interfaces on DFL-210
Post by: scrubsguy on July 21, 2011, 01:21:15 AM

how is your dfl-210 connected in your network? but this i mean, switch to server >server to dfl>dfl -router?