D-Link Forums

The Graveyard - Products No Longer Supported => D-Link Storage => DNS-321 => Topic started by: mgreco2k on January 08, 2009, 07:59:59 AM

Title: DNS-321 with 1.5TB SATA disks
Post by: mgreco2k on January 08, 2009, 07:59:59 AM

Has anyone used the DNS-321 with 1.5TB SATA disks yet ? Please let me know what models you've seen work/not work. Thanks -

Title: Re: DNS-321 with 1.5TB SATA disks
Post by: ECF on January 08, 2009, 09:16:32 AM

1.5TB Drives should work fine using the latest firmware 1.01. The ST31500341AS have been successfully tested.

Title: Re: DNS-321 with 1.5TB SATA disks
Post by: garyhgaryh on January 09, 2009, 11:13:00 PM

This should answer your questions (and the answer is YES):

http://forums.dlink.com/index.php?topic=3246.0

Gary

Title: Re: DNS-321 with 1.5TB SATA disks
Post by: sghayal on January 12, 2009, 02:33:35 PM

I am using it and its operational.

Title: Re: DNS-321 with 1.5TB SATA disks
Post by: Freeman on January 13, 2009, 08:59:17 AM

I have two Seagate ST31500341AS   1500 G drives ( as indicated on the DNS 321 status page ). Other than the hung at 94% formatting issue they're working fine. I found they ran hotter than the two 1GB drives in my DNS-323 so I had to up the email temperature alert so my box wouldn't shut down when accessing the drives for an extended period of time. They run at 45C idle and about 50C running, I had to increase the temperature alert to 55C.