D-Link Forums

The Graveyard - Products No Longer Supported => D-Link NetDefend Firewalls => Topic started by: xavierbt on February 20, 2011, 08:39:43 AM

Title: PPTP server and routes
Post by: xavierbt on February 20, 2011, 08:39:43 AM

I have a PPTP server working but remote users can only get access to lannet. I have other privates networks behind the firewall that i want to give access to my remote users but i haven't found where to put which networks will be routed though the PPTP server.

Title: Re: PPTP server and routes
Post by: silver_surfer30 on February 24, 2011, 09:18:47 AM

You can specify the networks that can be accessed from pptp users when creating the IP rule.
on the destination of the IP rule specify the interfaces you need to be accessed (if lan is specified, then only lan interface will be accessed, if you want more than the lan interface to be accessed then create an interface group whith the interface you need to be accessed). if you want more than the lannet to be accessed then create a object group with the lannet and the others networks to be accessed.

Title: Re: PPTP server and routes
Post by: xavierbt on February 25, 2011, 03:18:11 PM

I have the rules that allow from ppt to all my private networks, but i need to send to the client connecting to the pptp server which network will be reached though the pptp tunnel (192.168.1.0, 10.0.1.0 and 10.0.0.0).