D-Link Forums
The Graveyard - Products No Longer Supported => D-Link NetDefend Firewalls => Topic started by: ncastro.neodipol on March 04, 2011, 04:38:22 AM
-
I have two DSL connection: WAN1 & WAN2
I want to configure one SAT service(X) on WAN1 and other SAT service(Y) on WAN2.
It is posible?
I have created rule for SAT on WAN1 and work perfect
I have created rule for SAT on WAN2 and not work :-[
thank you!
-
It should just work.
Maybe you could post what you´re doing exactly, but its pretty much straightforward following the docs.
-
if your scenario is incoming connections from internet to the wan1 and wan 2 ip to publish a service:
you will need a policy based routing rule to apply a alternative routing table with lower metric for wan2 applied only for incoming traffic to wan2 ip.
-
Chechito, thanks for the answer, I'm facing the same problem with a DFL-800, could you explain the solution in detail?
I'll post a few images explaining the situation. I've set up routing, WAN1 has a higher priority. SAT rules from WAN1 to DMZ work ok, but SAT rules from WAN2 to LAN don't seem to work.(It works if the connection is made from a computer in the WAN2 network, but not when the connection comes from the internet(All-nets).
Interfaces setup:
(https://lh5.googleusercontent.com/-yj7M_ceHj0w/TltzdYGgDbI/AAAAAAAAAK0/d7BXLZxYf18/s912/2011-08-29_080312.png)
Rule from WAN1 to DMZ(Works):
(https://lh5.googleusercontent.com/-B8QLPWSB7Dc/Tltzcz1SUHI/AAAAAAAAAKs/WmEyq9hnCo8/s912/2011-08-29_080411.png)
Rule from WAN2 to LAN(Does not work)
(https://lh6.googleusercontent.com/-5pFXM0ApLPI/TltzdPCGxjI/AAAAAAAAAKw/3sGyMXOrkA4/s912/2011-08-29_080422.png)
Routing table:
(https://lh4.googleusercontent.com/-DIs2phmzQzc/TltzeHdkyxI/AAAAAAAAALA/uRNqqJ6aD5c/s912/2011-08-29_080437.png)
SAT Details for WAN1 to DMZ rule:
(https://lh6.googleusercontent.com/--93k4GDP1xM/Tltzd3UrAwI/AAAAAAAAAK4/5Y1NOIBfRt4/s912/2011-08-29_080817.png)
SAT Details for WAN2 to LAN rule:
(https://lh5.googleusercontent.com/-PVTgieg5bvI/TltzeHrF3GI/AAAAAAAAAK8/acv3I4BdPjQ/s912/2011-08-29_080832.png)
-
I've got it to work with the following config(See images):
Routing Rule:
(https://lh5.googleusercontent.com/-HnzH7CbyuDU/TlugaJFlydI/AAAAAAAAALE/prcRFklywPk/s912/2011-08-29_111925.png)
Route:
(https://lh4.googleusercontent.com/-eGcir6F455g/TlugaeFDqaI/AAAAAAAAALI/-JMs41sgYjI/s912/2011-08-29_112009.png)
IP Rule:
(https://lh3.googleusercontent.com/-xfvqbIf5S6Q/Tlugavpp3II/AAAAAAAAALM/HM4xNOZx4b8/s912/2011-08-29_112027.png)
SAT Setup:
(https://lh4.googleusercontent.com/-yfyn88n8eFw/Tluga-rpddI/AAAAAAAAALQ/zFeea7XrfME/s912/2011-08-29_112039.png)
Acess Rule:
(https://lh4.googleusercontent.com/-0QHT5551NXw/TlugbCwkRUI/AAAAAAAAALU/eUowHRphrFQ/s912/2011-08-29_112051.png)
-
Hello everyone,
First, thank you lingnau for your screenshots, it really helps to understand!
I keep having some problems with my configuration which is a little different, I wondered if you had any idea on how to solve it.
My configuration was one WAN1 with multiple public IPs from my ISP.
The firewall is supposed to identify which IP the customer is trying to access and redirect it to the right interface. We have two websites with two different IPs
This configuration was working good, until we introduced a second WAN, WAN2 from another ISP.
We would like to be able to ping and access the websites from both WAN1 and WAN2 under different IPs.
Unfortunately, we can't access it from the WAN2 public IPs, and I really tried everything I could think of...
Please advise if you have encountered such a problem, I will post more information tomorrow if you need them.
Thank you so much,
Loic
-
Since it's not exactly the same topic, I moved it in another one
http://forums.dlink.com/index.php?topic=42333.0 (http://forums.dlink.com/index.php?topic=42333.0)
Thank you ;)