D-Link Forums
The Graveyard - Products No Longer Supported => Routers / COVR => DIR-130 => Topic started by: freemind on March 28, 2011, 07:48:48 AM
-
Hello,
I'm sorry, but I do not found my product into the list, so I add a post here!! :-\
I have a DI-804HV firewall-router. I want to connect my network using VPN ipsec protocol.
On router side I follow the default procedure (wizard that create a dynamic VPN setting) and add an user. I let the IKE and ipsec proposal as default.
On the other side, I have a Window 7 pro 64bits. I have configured the VPN to connect the router. The configuration is very simple!!
As a result, windows cannot establish a VPN tunnel with the router. Inside the log of router, i have the following lines:
Monday March 28, 2011 15:20:37 Receive IKE M1(INIT) : 192.168.1.42 --> 192.168.1.120
Monday March 28, 2011 15:20:37 Try to match with ENC:None AUTH:PSK HASH:SHA1 Group:Others
Monday March 28, 2011 15:20:37 Try to match with ENC:None AUTH:PSK HASH:SHA1 Group:Others
Monday March 28, 2011 15:20:37 Try to match with ENC:None AUTH:PSK HASH:SHA1 Group:Others
Monday March 28, 2011 15:20:37 Try to match with ENC:3DES AUTH:PSK HASH:SHA1 Group:Others
Monday March 28, 2011 15:20:37 Try to match with ENC:3DES AUTH:PSK HASH:SHA1 Group:Group2
Monday March 28, 2011 15:20:38 Send IKE (INFO) : delete 192.168.1.120 -> 192.168.1.42 phase 1
May be some one knows wich IKE and ipsec parameter must be used for windows 7 ipsec connection
Thank you and best regards.
-
Hello,
After new search, I do not found the correct configuration to establish a VPN (IPSEC or L2TP) connection from a windows 7 64byte to the DI-804HV.
But I found a way to establish a connection using the shrew VPN client.
The issue is not solved, but I found an acceptable solution waiting for the final one!!!
Best Regards.
-
Your local and remote subnets are the same!