D-Link Forums

The Graveyard - Products No Longer Supported => D-Link Storage => DNS-320 => Topic started by: Carlpea on April 06, 2011, 02:11:47 PM

Title: Printing with User accounts setup
Post by: Carlpea on April 06, 2011, 02:11:47 PM

Hi,
 
I'm on firmware V2. I have a Dell laser printer connected to my DNS-320. When I have no users set-up so the device is open to anyone connected to my home network I can print fine but as soon as I set-up a couple of users it refuses to print?

It's like the print is being sent to the spooler but the NAS is refusing the print due to some sort of permissions issue.

I can't see anywhere that I can set permissions for printing, just for folders.

Any advise would be appreciated.

Title: Re: Printing with User accounts setup
Post by: Carlpea on April 08, 2011, 11:39:56 AM

For anyone else with this issue Dlink have confirmed its a problem and are working on fixing it.

Title: Re: Printing with User accounts setup
Post by: bedo02 on April 15, 2011, 01:45:39 AM

Hi,

thank you for your update! I have the exact same issue with Dell 1110.

Title: Re: Printing with User accounts setup
Post by: oroblraM on April 23, 2011, 04:57:38 AM

Hi!

any replies by D-Link??

got same prob here...  ???  Printer is a Canon IP4200...

Title: Re: Printing with User accounts setup
Post by: Carlpea on April 23, 2011, 05:15:50 AM

They advised me to check ftp://ftp.dlink.co.uk/dns/DNS-320/firmware/ every so often for a new firmware.

Title: Re: Printing with User accounts setup
Post by: Nerach on April 25, 2011, 10:30:38 AM

I've got an HP photosmart Plus B209a-m and, I can't print anything...

I already have the firmware 2.0...

Title: Re: Printing with User accounts setup
Post by: Carlpea on April 25, 2011, 10:47:34 AM

It's not printer specific; its a firmware issue where you can't set permissions to print.

You will need to remove all user accounts and use anonymous login until a new firmware is released.

Title: Re: Printing with User accounts setup
Post by: mada on April 28, 2011, 06:09:22 PM

If the ftp is turned on and you don't have any permissions set does that mean that anyone can go through my data over the internet, I want to setup the ftp and a print server but not if all my data is exposed

Title: Re: Printing with User accounts setup
Post by: Carlpea on April 28, 2011, 11:34:37 PM

If they knew your IP or DNS address then yes anyone could see your data.

Title: News by D-Link
Post by: oroblraM on May 02, 2011, 02:43:32 PM

@ Carlpea and all the others with this problem

Today i contacted D-Link Support here in Germany.
They seemed very suprised about our difficulties with the Print-Server built in the DNS-320.

But they asked me for my configuration-backup including all the users and their passes, they will try to reproduce the failure..   ;)

sounds good so far...

so, if there are any sensational news i will let you all know...

in the meantime: Let's have a cup of coffee....  (or some beer, cause at least i'm a bavarian)    ;D

p.s. sorry bout my english, it's a long time ago i visited school...

Title: Re: News by D-Link
Post by: Carlpea on May 02, 2011, 03:08:41 PM

Quote from: oroblraM on May 02, 2011, 02:43:32 PM

@ Carlpea and all the others with this problem

Today i contacted D-Link Support here in Germany.
They seemed very suprised about our difficulties with the Print-Server built in the DNS-320.

But they asked me for my configuration-backup including all the users and their passes, they will try to reproduce the failure..   ;)

sounds good so far...

so, if there are any sensational news i will let you all know...

in the meantime: Let's have a cup of coffee....  (or some beer, cause at least i'm a bavarian)    ;D

p.s. sorry bout my english, it's a long time ago i visited school...

My case reference is 445439 and was being dealt with by Berlin, Stockholm, Rome, Bern if it's any help.

Title: Re: Printing with User accounts setup
Post by: Carlpea on June 05, 2011, 10:36:12 AM

Just to confirm the Beta firmware has resolved this issue.

Thanks :).