D-Link Forums
The Graveyard - Products No Longer Supported => D-Link NetDefend Firewalls => Topic started by: mariachi on April 12, 2011, 01:03:20 AM
-
hi
i m new on this forum.
i have a routing probleme on my dfl-210.
my config is :
firewall ip wan: 192.168.1.100
firewall ip lan or config ip : 10.0.0.3
and in backward i have a router with ip 192.168.1.1
my computer have ip 10.0.0.4 with 255.0.0.0 and gateway is 10.0.0.3 (my ip lan firewall)
i can ping 10.0.0.3, 192.168.1.100 but not 192.168.1.1
i think it's a routing problem but i don't understand how routing works on dfl.
on my dfl the
ip wan is 192.168.1.100
the wan_gw is 192.168.1.1
the lan ip is 10.0.0.3
lan net is 255.0.0.0/8
wan net is 255.255.255.0/24
(http://www.flickr.com/photos/61677246@N06/5612142567/)
http://www.flickr.com/photos/61677246@N06/5612142567/ (http://www.flickr.com/photos/61677246@N06/5612142567/)
(http://farm6.static.flickr.com/5070/5612142567_566cb3d399.jpg) (http://www.flickr.com/photos/61677246@N06/5612142567/)
routage (http://www.flickr.com/photos/61677246@N06/5612142567/) par dam83 (http://www.flickr.com/people/61677246@N06/), sur Flickr
could you help me please
ps: i made a rule wich allow ping from all to all
-
the fifth route its problematic
un check the autmomatic creation route on lan interface settings lan interface.
PD
using 10.0.0.0 /8 on lan network its a open window to have conflicts with isp network evaluate change it to some 192.168.x.x or 172.16-31.x.x using bigger masks to avoid future conficts.
-
tanks
i saw on my firewall that automatic creation is actived