D-Link Forums

The Graveyard - Products No Longer Supported => D-Link NetDefend Firewalls => Topic started by: BloodMaster`s on April 28, 2011, 06:49:22 AM

Title: DFL-800 problem after update last firmware
Post by: BloodMaster`s on April 28, 2011, 06:49:22 AM

Hello.
Have a problem with one DFL-800 A1. After update firmware to 2.26.00, and reset only setting to default, and problems began.

No connection after reset settings.
Restart the unit and no connection.

Then connect to the unit trout console and reboot,

+**Warning** FLASH configuration checksum error or invalid key
Use 'fconfig -i' to [re]initialize database

EM-8680 Ver.B1 2005-11-18


Starting system...
Entry point: 0x00101028, address range: 0x00100000-0x001e2000
Starting firewall core in 0 seconds.
Press any key to abort and load boot menu

Loading fwcore.cfx

D-Link DFL 2.04.00V
Copyright 1996-2005. All rights reserved
SSH IPSEC Express SSHIPM version 5.1.1 library 5.1.1
Copyright 1997-2003 SSH Communications Security Corp.
Build : Nov 18 2005




D-Link DFL 2.04.00V
Copyright 1996-2005. All rights reserved
SSH IPSEC Express SSHIPM version 5.1.1 library 5.1.1
Copyright 1997-2003 SSH Communications Security Corp.
Build : Nov 18 2005



Generation date/time: 2022-02-03 04:57:02

Reason: Exception 'SWI' occurred at address 0x1022bc
Dump of loaded PE-modules:
fwloader.cfx(1.05.06): Base: 0x00100000, Entry: 0x00101028, StackSize: 0x0, ImgSize: 0xe2000
fwcore.cfx(8.51.0.0): Base: 0x074854b8, Entry: 0x0007dea8, StackSize: 0x200000, ImgSize: 0xb2e000

Dump of open files:

Register dump:
----------------------------------------------------
r0 : 0x00000001, r1 : 0x001a888c, r2 : 0x80000000, r3 : 0x00000020, r4 : 0x0011d318,
r5 : 0x07fbc74a, r6 : 0x00000000, r7 : 0x00000000, r8 : 0x072739dc, r9 : 0x07484130,
r10: 0x07484160, r11: 0x074840b8, r12: 0x00195dc0,
Faulting instruction: 0x001022bc (opcode: 0x5f5f4578)
Instructions surrounding the faulting one
   0xebffffaa
   0xe5804000
   0xebffff8f
   0xe8fd9fff
-> 0x5f5f4578
   0x635f4649
   0x51000000
   0xff00000c
   0xe24ee004
Faulting function   : ?Unknown?
Generation date/time: 2022-02-03 04:57:03

Reason: Exception 'DataAbort' occurred at address 0x1027cc
Dump of loaded PE-modules:
fwloader.cfx(1.05.06): Base: 0x00100000, Entry: 0x00101028, StackSize: 0x0, ImgSize: 0xe2000

Dump of open files:

Register dump:
----------------------------------------------------
r0 : 0x001a888c, r1 : 0x00000004, r2 : 0xe51b2018, r3 : 0xe51b2018, r4 : 0x00109ad0,
r5 : 0x00000005, r6 : 0x00199c34, r7 : 0x00000007, r8 : 0x00000008, r9 : 0x00000009,
r10: 0x0000000a, r11: 0x001027a4, r12: 0x001027a8,
Faulting instruction: 0x001027cc (opcode: 0x00000005)
Instructions surrounding the faulting one
   0x00008000
   0xc8004000
   0x0000a0c0
   0x0018c58c
-> 0x00000005
   0x00199c34
   0x00000007
   0x00000008
   0x00000009
Faulting function   : "do_IRQ"

And continues reboot with a different error.

Title: Re: DFL-800 problem after update last firmware
Post by: chechito on April 29, 2011, 06:48:40 PM

get help from your local distributor of dlink, maybe the unit need to bee replaced

Title: Re: DFL-800 problem after update last firmware
Post by: silver_surfer30 on May 05, 2011, 05:05:14 AM

Device seems to be dead.
License file in flash corrupted
RMA unit

Title: Re: DFL-800 problem after update last firmware
Post by: marcinw@eranet.pl on May 28, 2011, 02:16:44 PM

Please check your power supply. I had similar problem with my DFL-800. After change capacitors  not occurs problem. Sorry for my bad english.
Bye