D-Link Forums
The Graveyard - Products No Longer Supported => Routers / COVR => DIR-655 => Topic started by: davenc on May 14, 2011, 09:13:19 AM
-
Have the DIR-655 Hardware Version A1. Firmware 1.00NA dated Feb 2010. When I try to upload ANY firmware update from the DLINK site, it says that it is not for that device or is corrupt.
Any help?
David
-
Are you sure about that date the 1.00 firmware didn't have an NA and should have a date of 2006 or earlier?
-
(http://dl.dropbox.com/u/180491/firmware2.png)
Here is a screenshot. If you study it carefully you can see that I have a 665 instead of a 655. I guess that makes a difference!
Thanks for your response, even if I do feel a bit sheepish. It's progress!
-
Good that you have it sorted out, looks like you are running the current firmware as the ftp site shows only the 1.00NA avaialable for download.
-
Called D-Link Tech Support. They blamed the printer for my problem.
Here is the problem:
CAN print to the printer when connected via ethernet to the D-Link router.
CANNOT print to the printer when connected via WIFI to the D-Link router.
If I substitute a different WIFI router for the D-Link Router, everything works.
When attempting to print from a Mac connected vie WIFI to the network, I can ping the Brother printer, but the Mac cannot connect or print. If I plug in an ethernet cable while it is "searching" for the printer, printing commences.
Sounds like a router issue to me, not a printer issue.
Solution: Buy a different brand of router. I simply don't know what else to do.
-
are you devices set up for DHCP reserved IP addressing on the router?
Is DNS relay enabled?