D-Link Forums

The Graveyard - Products No Longer Supported => Access Points / Extenders => DAP-1522 => Topic started by: jgerbrand on May 18, 2011, 11:36:45 AM

Title: DAP-1522 AP Mode - not connecting at n speeds
Post by: jgerbrand on May 18, 2011, 11:36:45 AM

I've got the DAP-1522 connected in AP mode. Multiple N speed laptops but they're limiting out to G speeds (54 mbps). Firmware 1.31. Current config is
Wireless Mode :    Access Point   
802.11 Band :    2.4GHz
802.11 Mode :    n and g
Enable Auto Channel Scan :    yes   
Transmission Rate :    Best
  (Mbit/s)
Channel Width :    Auto
Security: WPA (Auto, wpa 1 and 2)
TKIP and AES, or TKIP only, same problem

Connecting with brand new windows 7 laptops. N Capable. Some G laptops on the network as well.
What's the issue?

Title: Re: DAP-1522 AP Mode - not connecting at n speeds
Post by: drshock on May 26, 2011, 02:59:52 PM

I had this same issue, you have to force WPA2 and AES only under manual setup.  Also g and n only (get rid of a/b).

Otherwise the speed is gimped to g max.

Title: Re: DAP-1522 AP Mode - not connecting at n speeds
Post by: iontyre on June 01, 2011, 05:45:01 AM

Thanks, I had the same problem and just fixed the settings as you suggested.