D-Link Forums

The Graveyard - Products No Longer Supported => Routers / COVR => DIR-655 => Topic started by: skyseek on June 28, 2011, 04:18:30 PM

Title: Configuring the DP-G310 Print Server with the DIR 655
Post by: skyseek on June 28, 2011, 04:18:30 PM

Has anyone configured a DP-G310 Print Server to work with the DIR 655?  I have upgraded the firmware so I have WPA Security.  I have typed in the WPA key in the DP-G310 setup.    The DIR 655 sees the DP-G310 but it won't assign it an IP address.  I can see the DP-G310 MAC address in the DIR 655 wireless status page but the IP is 0.0.0.0  and it disappears and reappears in the wireless connections list.

Any Ideas?

Thanks!

SkySeek

Title: Re: Configuring the DP-G310 Print Server with the DIR 655
Post by: FurryNutz on June 29, 2011, 12:17:07 PM

How is the print server connected to the router, wired or wireless?
What wireless modes are you running? Mixed? Single? Try Single mode G to test.
What security mode does the print server support? WPA or WPA2?


Setup Reserved (Static) IP addresses on the router for your devices.
Ensure DNS IP addresses are being filled in under Setup/Internet/Manual.
Ensure Advanced DNS Service is disabled if you have this option.
Ensure DNS Relay is enabled.

Title: Re: Configuring the DP-G310 Print Server with the DIR 655
Post by: skyseek on June 29, 2011, 06:20:56 PM

I tried your suggestion. Verified everything you mentioned in your reply. I added a static IP in the DHCP Range and tied it to the DP-G310 MAC address. I can see it pop up in the Wireless status page but it still displays the MAC Address and 0.0.0.0.

It is wireless connection.  WPA with the correct key in the print server.


Thanks!

Title: Re: Configuring the DP-G310 Print Server with the DIR 655
Post by: FurryNutz on June 29, 2011, 08:20:06 PM

Try with out any WiFi security to see if it will connect with a IP address.