D-Link Forums

The Graveyard - Products No Longer Supported => Routers / COVR => DIR-655 => Topic started by: tevibear on August 19, 2011, 02:10:07 PM

Title: client associated twice before being secured and linked
Post by: tevibear on August 19, 2011, 02:10:07 PM: I'm just wondering why my computer is being associated twice before being secured and linked when it obtains an IP address from the DIR 655 router. I am using the DWA-552 wireless card to connect to it. When I first started using them together, this wasn't happening. Then, all of a sudden, one day it just started showing "above message repeated 1 times" just below the log entry for the client being associated". Anyone have a clue why this is happening?

Thanks
Title: Re: client associated twice before being secured and linked
Post by: FurryNutz on August 19, 2011, 02:49:53 PM: Probably a failure to get a good connection on the 1st attempt. Is the PC running well after it connects?
Title: Re: client associated twice before being secured and linked
Post by: Sammydad1 on August 19, 2011, 07:49:10 PM: maybe windows glitched and started using its WZC service or vice versa, maybe the native software for the NIC started running properly....
Title: Re: client associated twice before being secured and linked
Post by: Hard Harry on August 20, 2011, 12:13:34 PM: Or it could have tried AES and downgraded to TKIP, or visa versa.
Title: Re: client associated twice before being secured and linked
Post by: tevibear on August 20, 2011, 04:13:46 PM: It's set to use AES only, WPA personal and Wireless N only. It's probably no big deal, but I was just curious why it might be happening. Thanks for everyone's input. It is much appreciated. Here is a snip of the log file showing what I am talking about.

[INFO]   Thu Aug 18 02:19:43 2011   Allowed configuration authentication by IP address 192.168.0.197
[INFO]   Thu Aug 18 02:18:58 2011   Blocked packet from 192.168.0.1 to 239.255.255.250 that was received from the wrong network interface (IP address spoofing)
[INFO]   Thu Aug 18 02:18:51 2011   Above message repeated 7 times
[WARN]   Thu Aug 18 02:15:38 2011   A network computer (My Computer) was assigned the IP address of 192.168.0.197.
[INFO]   Thu Aug 18 02:15:33 2011   ______: Wireless system with MAC address 0018E78659B7 secured and linked
[INFO]   Thu Aug 18 02:15:33 2011   ______: Wireless system with MAC address 0018E78659B7 associated
[INFO]   Thu Aug 18 02:15:33 2011   Above message repeated 1 times
[INFO]   Thu Aug 18 02:11:22 2011   WAN interface speed measurement completed
[INFO]   Thu Aug 18 02:11:17 2011   Wireless link is up
[INFO]   Thu Aug 18 02:11:14 2011   Starting DHCP server
[INFO]   Thu Aug 18 02:11:09 2011   Estimating speed of WAN interface
[INFO]   Thu Aug 18 02:11:08 2011   Obtained IP Address using DHCP.
[INFO]   Thu Aug 18 02:11:07 2011   Bringing up WAN using DHCP
[INFO]   Thu Aug 18 02:11:07 2011   WAN interface cable has been connected
[INFO]   Thu Aug 18 02:11:07 2011   LAN interface is up
[INFO]   Thu Aug 18 02:11:07 2011   LAN Ethernet Carrier Detected
[INFO]   Thu Aug 18 02:11:06 2011   Device initialized
[WARN]   Thu Aug 18 02:11:05 2011   Wireless schedule init
[INFO]   Thu Aug 18 02:11:05 2011   guest: Unlock AP setup
[WARN]   Thu Aug 18 02:11:05 2011   primary: Lock AP setup
Title: Re: client associated twice before being secured and linked
Post by: FurryNutz on August 22, 2011, 07:14:32 AM: I think thats just how it supposed to be collecting data for the logs. Nothing to worry about. If the router is running and working, Enjoy it. ;)