D-Link Forums
The Graveyard - Products No Longer Supported => Routers / COVR => DIR-615 => Topic started by: Alice on August 25, 2011, 02:42:44 AM
-
I was using this router and Malaysia TM UNIFI service. I can use wireless but can't detect the LAN port. I have try it to other modem router and it's working. Its keep showing my local area connection network cable unplugged and no signal at all. And the router was working well on other PC and notebook.Try many way but still can't work.Please help..
For information,
I am using Window Vista and my notebook is ASUS.
-
What HW version is your router?
What FW version is currently loaded?
What ISP Service do you have? Cable or DSL?
What ISP Modem do you have? Stand Alone or built in router?
What ISP Modem make and model do you have?
If this modem has a built in router, it's best to bridge the modem. Having 2 routers on the same line can cause connection problems.
Ensure DNS IP addresses are being filled in under Setup/Internet/Manual?
Turn off QoS options.
Turn off Advanced DNS Services if you have this option.
Turn on DNS Relay under Setup/Networking.
Setup DHCP reserved IP addresses for all devices on the router.
Ensure devices are set to auto obtain an IP address.
Set Firewall settings to Endpoint Independent for TCP and UDP.
What wireless modes are you using?
Try single mode G or mixed G and N?
What security mode are you using? WEP, WPA or WPA2? Preferred is WPA-Personal. Auto TPIK and AES.
What wireless devices do you have connected?
Any cordless house phones?
Any other WiFi routers in the area?
Turn off all anti virus and firewall programs on PC while testing.
Turn off all devices accept for one wired PC while testing.
Check cable between Modem and Router, swap out to be sure. Cat6 or 5e recommended.
-
Thx Alot for ur reply, and sorry to late to reply
After Few days keep trying but still not working, i have been surrender....
I go bought a new router from other brand... and everything solve without do any setting
-
Good luck.