D-Link Forums

The Graveyard - Products No Longer Supported => D-Link Storage => DNS-320 => Topic started by: Creo on October 10, 2011, 11:33:37 PM

Title: Need 2.02b1 firmware.
Post by: Creo on October 10, 2011, 11:33:37 PM: Guys, help me please! I need 2.02b1 firmware, but it's removed from d-link FTP.
Please upload on any sharing site and publish link in this topic.
Thank's.
Title: Re: Need 2.02b1 firmware.
Post by: JavaLawyer on October 11, 2011, 04:10:47 AM: Quote from: Creo on October 10, 2011, 11:33:37 PM
Guys, help me please! I need 2.02b1 firmware, but it's removed from d-link FTP.
Please upload on any sharing site and publish link in this topic.
Thank's.

I'm sure D-Link had a compelling technical reason for removing this firmware version and would caution against further installations without due consideration. ???
Title: Re: Need 2.02b1 firmware.
Post by: albert on October 11, 2011, 05:49:02 AM: This firmware can still be found in SG site here (http://ftp://dlink.com.sg/Temp_Folder/DLINKEu_DNS320.2.02b01(2.06.0901.2011)(BETA)) but I would advice upgrading unless you wish to be stuck with no option for downgrading. >:(
Title: Re: Need 2.02b1 firmware.
Post by: JavaLawyer on October 11, 2011, 05:54:47 AM: Quote from: albert on October 11, 2011, 05:49:02 AM
This firmware can still be found in SG site here (http://ftp://dlink.com.sg/Temp_Folder/DLINKEu_DNS320.2.02b01(2.06.0901.2011)(BETA)) but I would advice upgrading unless you wish to be stuck with no option for downgrading. >:(

I'm confident D-Link's technical team is hard at work improving the DNS-320 firmware for the next release (or re-release).
Title: Re: Need 2.02b1 firmware.
Post by: brewster0101 on October 17, 2011, 02:19:42 PM: I wouldn't update to the new 2.02b1 firmware if you use the upnp server. Its all screwed up.
Title: Re: Need 2.02b1 firmware.
Post by: ECF on October 20, 2011, 06:28:53 PM: Quote from: brewster0101 on October 17, 2011, 02:19:42 PM
I wouldn't update to the new 2.02b1 firmware if you use the upnp server. Its all screwed up.

Can you please explain how it is screwed up so that I may look into it if it is infact? I havent seen any issues.
Title: Re: Need 2.02b1 firmware.
Post by: brewster0101 on October 22, 2011, 11:52:45 AM: Quote from: ECF on October 20, 2011, 06:28:53 PM

Can you please explain how it is screwed up so that I may look into it if it is infact? I havent seen any issues.

Sure. I hope though it is an issue everyone is having - otherwise I sound stupid. My media library no longer updates on its own. I have to manually do it, otherwise anything new I put on the NAS box doesn't show up on a media server. Used to be fine.
Title: Re: Need 2.02b1 firmware.
Post by: cable2 on October 23, 2011, 12:44:11 PM: Hi,
I have a few of these devices and the media server was actually improved/ fixed with 202, none of the earlier media servers had the proper alpha-numeric file order, there were basically a bunch of random folders and files within. This was a pretty well documented bug. The media server updates automatically for me as I add new files, almost immediately. So I am puzzled by your problems. You might try going into the settings and re-saving your selections. I had some glitches with some of the new settings not being "active" even though they appeared to have been selected already. Then do a shutdown and start again. Good luck.
Title: Re: Need 2.02b1 firmware.
Post by: brewster0101 on October 24, 2011, 01:43:43 PM: I had to turn of my NAS box because it was acting strange - wouldn't wake up from sleep. Anyhow since then the media server library is updating on its own.