D-Link Forums

The Graveyard - Products No Longer Supported => Routers / COVR => DIR-825 => Topic started by: W4rn on October 17, 2011, 08:56:06 AM

Title: Qos
Post by: W4rn on October 17, 2011, 08:56:06 AM

Hello, i have a problem, i need more rules to apply to my network for qos, is there a way? is it normal that with qos enable, lan speed is capped to 10mbit like my wan?

Title: Re: Qos
Post by: FurryNutz on October 17, 2011, 09:06:39 AM

Can you give some details on what your trying to do with QoS? There are some stickies over on the DGL-4500 board that has some info on gaming. Let us know what your trying to do.

Also some other stuff you can look at:
What HW version is your router?
What FW version is currently loaded?

What ISP Service do you have? Cable or DSL?
What ISP Modem do you have? Stand Alone or built in router?
What ISP Modem make and model do you have?
If this modem has a built in router, it's best to bridge the modem. Having 2 routers on the same line can cause connection problems.

Ensure DNS IP addresses are being filled in under Setup/Internet/Manual? You can find these under Status/Device Info/Wan section.
Turn off ALL QoS (DIR only) GameFuel (DGL only and if ON.) options.
Turn off Advanced DNS Services if you have this option under Setup/Internet/Manual.
Turn on DNS Relay under Setup/Networking.
Setup DHCP reserved IP addresses for all devices on the router.
Ensure devices are set to auto obtain an IP address.
Set Firewall settings to Endpoint Independent for TCP and UDP.

What wireless modes are you using?
Try single mode G or mixed G and N?
What security mode are you using? WEP, WPA or WPA2? Preferred is WPA-Personal. WPA2/Auto TPIK and AES.

Title: Re: Qos
Post by: sale987 on October 22, 2011, 12:37:51 PM

Imagine thos settings (http://i1.squidoocdn.com/resize/squidoo_images/250/draft_lens1566975module4135563photo_1283752968router-bandwidth.gif)

Title: Re: Qos
Post by: FurryNutz on October 22, 2011, 01:19:00 PM

What is that for?

Quote from: sale987 on October 22, 2011, 12:37:51 PM

Imagine thos settings (http://i1.squidoocdn.com/resize/squidoo_images/250/draft_lens1566975module4135563photo_1283752968router-bandwidth.gif)

Title: Re: Qos
Post by: sale987 on October 24, 2011, 02:57:29 AM

Its QOS Settings for this router http://www.squidoo.com/bandwidth-management

Title: Re: Qos
Post by: FurryNutz on October 24, 2011, 07:37:55 AM

That for non-OEM FW isn't it?

Title: Re: Qos
Post by: sale987 on October 25, 2011, 02:12:55 AM

I Think it is non-OEM ..

Title: Re: Qos
Post by: FurryNutz on October 25, 2011, 07:12:56 AM

Ok, well, if you choose to use that. Were mainly here for OEM FW.