D-Link Forums

The Graveyard - Products No Longer Supported => D-Link Storage => DNS-323 => Topic started by: Geraner on February 15, 2009, 05:17:59 AM

Title: How to setup FTP with SSL?
Post by: Geraner on February 15, 2009, 05:17:59 AM

Hi,
I bought a DNS-323 and upgraded to the latest firmware 1.06.
In the release notes it is written:

Quote

Feature Additions:
5. Support FTP over SSL/TLS

But when I'm in the admin-view for the FTP-Server on my DNS-323, there is no possibility to set SSL.

How to setup an FTP-Server to use SSL with certificate and so on?

Regards
Geraner

Title: Re: How to setup FTP with SSL?
Post by: ttmcmurry on February 21, 2009, 10:14:12 PM

FTP over Explicit SSL is definitely supported in 1.06 and it works.  When you turn on FTP it's immediately available but you have no control over it- can't turn on/off FTPES, can't specify PASV range, can't install your own SSL certificate (one is provided but I have unanswered questions about it, PM me if you get yours working).

I still doubt it will work over the internet though; let me know if you have success. 

To test your 323, Fire up FileZilla, set up a new connection to your 323's IP address (or ddns name), set the server type to FTPES, login type normal, choose "Active" under transfer settings and connect.

Title: Re: How to setup FTP with SSL?
Post by: Crockie on February 25, 2009, 01:35:53 AM

I'm trying to setup my DNS-323 with SSL/TLS, and if I add it to my DMZ (for testing purposes), it works perfectly, but behind the routers firewall, it doesnt, so it must be a matter of opening the right ports, I guess? I've tried opening 21 and 990 but no go.

Title: Re: How to setup FTP with SSL?
Post by: ttmcmurry on February 25, 2009, 06:37:29 PM

Without the DMZ, I don't think it's possible to make it work behind the router-- too many ports are needed for TLS.  Since we don't have control over what ports it can use, we're stuck with what we have.