D-Link Forums
The Graveyard - Products No Longer Supported => Routers / COVR => DIR-655 => Topic started by: BShurilla on December 25, 2011, 08:41:56 PM
-
Ok, second major issue with a DLink router... first one had to get rid of because just wouldn't work with a 3CX server, anyway, I have a DIR-655 A4 factory shipped with 1.32NA I am trying to update the firmware to 1.34NA but it will not let me. It keeps saying
UPLOAD FAILED
The uploaded firmware file may not be correct. You may have uploaded a file that is not intended for this device, or the uploaded file may be corrupted.
If the uploaded file is correct, it is possible that the device may be too busy to properly receive it right now. In this case, please try the upload again. It is also possible that you are logged in as a 'user' instead of an 'admin' - only administrators can upload new firmware.
The Gateway will not be reprogrammed.
I am logged in as Admin, I am in port 1 on the lan, no other cables plugged in including modem, tried a soft reset, holding the reset button, and a 30/30/30 reset.. all still give same error on all firmware for 1.31NA to 1.35.. I'm just about ready to chuck this router out the window... what is wrong with it?
-
Sounds like you download may be corrupt. Redownload the firmware, unzip it and try again.
Do a Factory reset, flash and then you should be good
(a note: the 30/30/30 has no effect on the DIR routers)
-
wow. I was trying to upload the .zip... ;D uploading the .bin worked right away.. thanks
-
There is a FW update sticky in each of the forums regarding FW updating and the process FYI.
-
wow. I was trying to upload the .zip... ;D uploading the .bin worked right away.. thanks
That's what I thought was happening, glad you got it working.