D-Link Forums
The Graveyard - Products No Longer Supported => D-Link Storage => DNS-320 => Topic started by: sijan on January 02, 2012, 01:17:02 PM
-
Hi again,
After having problems with incremental backup na 553 error over ftp i decided to transfer files from FTP to DNS 320 over lan, i am downloading files on one computer and the uploading them to DNS320...
The problem is that i only get about 400kbs... I have tryed transfer from another computer but always receiving same speed...
i have Gigabit network nad beatwin computer transfer works fine, only problem is with DNS 320
Is there any solution ?
-
can anyone help ?
-
Any 3rd party security SW running in the background on the PC? Turn everything off temporarily to test.
How is the DNS and PCs connected together? router or switch in the mix somewhere?
-
To determine the cause, made sure you're not running any network intensive program like P2P and you're the only active user. Run NAStester to determine the actual thruput of your NAS on your network. You should be getting around 11MBps on FE connection and 20-40MBps on GbE connection. If not then something is wrong, could be as simple as a faulty cable or switch/router.
-
hi
there is no p2p at all , i am using ROUTER and switch , all other computers are runing perfeclty ok with transfers....
i will try NAStester nad put here results !
-
hi again
where can i download nass tester ?
-
hi i have changed the cable , now it is 2,5 mb in 1gb network is that ok ?
-
Hi sijan,
Here is the link you were looking for, http://www.808.dk/?code-csharp-nas-performance . Also, 2.5 MB is dramatically faster than 400 kbs about 6x faster, but even transferring a bunch of small files, I would think you should be over 6 MB. Are you sure you have a switch and not an older hub? You might try making the connection to the NAS via one of the ports directly from the router and use a computer which is also connected to the router as a test and see what kind of transfer speed you get then. If you get another dramatic improvement, you can bet that there is something off on your switch. Anyway, good luck.