D-Link Forums
The Graveyard - Products No Longer Supported => Routers / COVR => DIR-655 => Topic started by: cato on March 10, 2009, 09:47:26 AM
-
:-\
My 655 keeps rebooting in 3 mins to 1 hr.
the router has beed flashed from 1.20 to 1.22 (newest beta). now i am using 1.21EA. the problem is still occur.
now i changed the wifi channel width to 20Mhz. it seems stable. but i need to test it for longer time.
i doubt it is the wifi problem (maybe the draft N problem). anyone got the final solution on that router??
p.s. the router h/w ver. A4. shipped with 1.20EA firmware.
-
Where are you located and where did you purchase the router?
-
At least a couple people have reported having some reboots associated with the NTP time server option. I'd go back to 1.22b05 and start with disabling the time polling, make sure I put my settings in from scratch, and then start disabling extraneous options.
Good Luck
-
Did you load the saved config file in the new firmware? If so, reset to factory default and manually configure the router.
-
Been experiencing this but on a different router model. I have narrowed to down to a possible wi-fi radio problem if/when multiple Ethernet cables are connected onto the ports. The router works correctly when used only with the Ethernet cables (wireless disabled.) The tests I have done:
- different firmware versions
- different wireless adapters
- Tried either the D-Link configuration manager and Window Wireless Zero Configuration
- different Internet access (cable and DSL)
- different PCs
- different "physical" areas (home and other place
I have replaced my router and the replacement unit is "behaving" correctly.